Loading
Kitty2twoKitty2twohace 6 años
So I just started to dust my figure collection(in my detolf) for the first time in 7 months since they finally have dust on them. My room doesn't really produce dust and it's so clean in the detolf anyways.

I have four of the cubes completely dusted by using Office Depot cleaning duster ( www.officedepot... )

It's so easy to use and it's literally just spraying the figures clean. However after finishing two cubes, I noticed that it still leaves a very very very thin layer of dust.

I like using the can of air best since it's easy and quick. It only took me 10 mins to clean a whole cube but I wanna know if there is something quicker to use that isn't hard to use.

What do you guys use to clean?
3,547 hits • 0 favorito7 comentarios

Comentarios7

Raiskihace 6 años#2015415Canned air is bad for your figures. It has chemicals in it that can damage the paint of the PVC itself.
Canned air does not contain air, but gases that are non-reactive to many substances; including PVC. It could be harmful, though, due to the pressure at which the gases are released from the can, and the fact that depressurization decreases drastically the temperature which could probably wear painted surfaces. I personally don't recommend using canned air too to clean your figures.
hace 6 años
Raiskihace 6 años#2015415Canned air is bad for your figures. It has chemicals in it that can damage the paint of the PVC itself.

But I read that the bitterant added does leave a residue but the quantity of of chemical is too low too really matter.

I'm thinking about switching to using make-up brushes now though c: I'll keep the cans for cleaning small little places I can't get to.
hace 6 años
Canned air is bad for your figures. It has chemicals in it that can damage the paint of the PVC itself.
hace 6 años
mintbunny The Geeky Bunny
When I do actually dust, every few millennia, I use a Swiffer duster.
hace 6 años
Don't talk to me about dusting !!!!!

I have been reconfigurine my room for the past 3 days Got rizers for the Detolfs themselves to get them off the ground and to eye level, re-aranged the theater room and the office space. ts all part and parcel of the samme area I have for my figurine collection and the 150 Scalled figurines I have.

I will write a new blog once its all done with pictures of course.

But damm moving every detolf ( 7 of them emptying them out ) then re configuring them by series etc.. Fust the inside clean the class etc.. What an endevore. Ah you got to love dust it gets into everything.

> )

Tia
hace 6 años
Leosach Born this way
very recently I made an article related to dusting see if anything can help you out BLOG #12901
hace 6 años
I always use a feather duster and I have never had problems at all. I use it directly on my figures and there's not damage to the paint or the little details. I works great for me. : )
hace 6 años
Premium Figure Imports

Acerca de este blog

More by Kitty2two+

Ítems relacionados

Etiquetas0

Clubs relacionados